document number: 28758 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 30-sep-08 1 tnpw e3 vishay high stability thin film flat chip resistor 0.05 % (1000 h rated power at 70 c) tnpw e3 precision thin film flat chip resistors are the perfect choice for most fields of modern electronics where highest reliability and stability is of major concern. typical applications include automotive, telecommunication, industrial, medical equipment, precision test and measuring equipment. features ? superior moisture resistivity 0.25 % (85 c; 56 days; 85 % rh) ? lead (pb)-free solder contacts, rohs compliant ? aec-q200 compliant (sizes 0402 to 1206) ? low temperature coefficient and tight tolerances ( 0.1 %; 10 ppm/k) ? waste gas resistant applications ? test and measuring equipment ? telecommunication ? medical equipment ? industrial equipment ? instrumentation ? automotive notes (1) size not specified in en 140401-801 (2) rated voltage . the power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). using advanced temperat ure level may require special considerat ions towards the choice of circuit board and solder material. the rated diss ipation applies only if the permi tted film temperature is not ex ceeded. (3) measuring conditions in accordance with en 140401-801 ? tnpw 0402 without marking rohs compliant standard electrical specifications description tnpw0402 tnpw0603 tnpw0805 tnpw1206 tnpw1210 (1) tnpw2010 tnpw2512 (1) metric size rr 1005m rr 1608m rr 2012m rr 3216m rr 3225m rr 5025m rr 6332m resistance range 10 to 100 k 10 to 332 k 10 to 1 m 10 to 2 m 10 to 3.01 m 10 to 4.99 m 10 to 8.87 m resistance tolerance 1 %; 0.5 %; 0.1 % temperature coefficent 50 ppm/k; 25 ppm/k; 15 ppm/k; 10 ppm/k 50 ppm/k; 25 ppm/k climatic category (lct/uct/days) 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 rated dissipation, p 70 (2) 0.063 w 0.1 w 0.125 w 0.25 w 0.33 w 0.4 w 0.5 w operating voltage, u max. ac/dc 50 v 75 v 150 v 200 v 200 v 300 v 300 v maximum permissible film temperature 155 c 155 c 155 c 155 c 155 c 155 c 155 c thermal resistance (3) 870 k/w 550 k/w 440 k/w 220 k/w 170 k/w 140 k/w 110 k/w max. resistance change at p 70 ; r / r 10 to 100 k 10 to 332 k 10 to 1 m 10 to 2 m 10 to 3.01 m 10 to 4.99 m 10 to 8.87 m 1000 h 0.05 % 0.05 % 0.05 % 0.05 % 0.05 % 0.05 % 0.05 % 8000 h 0.10 % 0.10 % 0.10 % 0.10 % 0.10 % 0.10 % 0.10 % 225 000 h 0.30 % 0.30 % 0.30 % 0.30 % 0.30 % 0.30 % 0.30 % insulation voltage: u ins 1 min 75 v 100 v 200 v 300 v 300 v 300 v 300 v continuous 75 v 75 v 75 v 75 v 75 v 75 v 75 v fit observed 0.1 x 10 -9 /h 0.1 x 10 -9 /h 0.1 x 10 -9 /h 0.1 x 10 -9 /h 0.1 x 10 -9 /h 0.1 x 10 -9 /h 0.1 x 10 -9 /h weight/1000 pieces 0.65 g 2 g 5.5 g 10 g 16 g 28 g 39 g p x r
www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 28758 2 revision: 30-sep-08 tnpw e3 vishay high stability thin film flat chip resistor 0.05 % (1000 h rated power at 70 c) dimensions size dimensions in millimeters inch metric l w h t1 t2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.10 0603 1608 1.6 0.10 0.85 0.10 0.45 0.10 0.3 0.20 0805 2012 2.0 0.15 1.25 0.15 0.45 0.10 0.4 0.20 1206 3216 3.2 0.15 1.6 0.15 0.55 0.10 0.5 0.25 1210 3225 3.2 0.15 2.45 0.15 0.60 0.15 0.5 0.25 2010 5025 5.0 0.15 2.5 0.15 0.60 0.15 0.6 0.25 2512 6332 6.3 0.20 3.1 0.15 0.60 0.15 0.6 0.25 solder pad dimensions in millimeters size reflow soldering wave soldering inch metric a b l a b l 0402 1005 0.4 0.6 0.5 - - - 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.3 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 1210 3225 0.9 2.5 2.0 1.1 2.5 2.3 2010 5025 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 1.0 3.2 5.2 1.2 3.2 5.2 temperature coefficient and resistance range type tcr tolerance resistance value e-series tnpw0402 50 ppm/k 1 % 10r to 100k 24 to 96 0.5 % 10r to 100k 24 to 192 0.1 % 47r to 100k 25 ppm/k 1 % 10r to 100k 24 to 96 0.5 % 10r to 100k 24 to 192 0.1 % 47r to 100k 15 ppm/k 0.1 % 10 ppm/k 0.1 % tnpw0603 50 ppm/k 1 % 10r to 332k 24 to 96 0.5 % 10r to 332k 24 to 192 0.1 % 25 ppm/k 1 % 10r to 332k 24 to 96 0.5 % 10r to 332k 24 to 192 0.1 % 15 ppm/k 0.1 % 47r to 332k 10 ppm/k 0.1 % tnpw0805 50 ppm/k 1 % 10r to 1m0 24 to 96 0.5 % 10r to 1m0 24 to 192 0.1 % 25 ppm/k 1 % 10r to 1m0 24 to 96 0.5 % 10r to 1m0 24 to 192 0.1 % 15 ppm/k 0.1 % 47r to 1m0 10 ppm/k 0.1 % tnpw1206 50 ppm/k 1 % 10r to 2m0 24 to 96 0.5 % 10r to 2m0 24 to 192 0.1 % 25 ppm/k 1 % 10r to 2m0 24 to 96 0.5 % 10r to 2m0 24 to 192 0.1 % 15 ppm/k 0.1 % 47r to 2m0 10 ppm/k 0.1 %
document number: 28758 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 30-sep-08 3 tnpw e3 high stability thin film flat chip resistor 0.05 % (1000 h rat ed power at 70 c) vishay note (1) please refer to packaging table tnpw1210 50 ppm/k 1 % 10r to 3m01 24 to 96 0.5 % 10r to 3m01 24 to 192 0.1 % 47r to 2m13 25 ppm/k 1 % 10r to 3m01 24 to 96 0.5 % 10r to 3m01 24 to 192 0.1 % 47r to 2m13 15 ppm/k 0.1 % 10 ppm/k 0.1 % tnpw2010 50 ppm/k 1 % 10r to 4m99 24 to 96 0.5 % 10r to 4m99 24 to 192 0.1 % 47r to 1m0 25 ppm/k 1 % 10r to 4m99 24 to 96 0.5 % 10r to 4m99 24 to 192 0.1 % 47r to 1m0 tnpw2512 50 ppm/k 1 % 10r to 8m87 24 to 96 0.5 % 10r to 8m87 24 to 192 0.1 % 47r to 1m0 25 ppm/k 1 % 10r to 8m87 24 to 96 0.5 % 10r to 8m87 24 to 192 0.1 % 47r to 1m0 temperature coefficient and resistance range type tcr tolerance resistance value e-series part number and product description products can be ordered using either the product description or the part number. for ordering tnpw with snpb contacts please refer to latest edition of data sheet tnpw lead bearing. part number: (lead (pb)-free) tnpw12061k32deea model value tolerance tcr pac k ag i n g (1) special tnpw0402 tnpw0603 tnpw0805 tnpw1206 tnpw1210 tnpw2010 tnpw2512 r = decimal k = thousand m = million (4 digits) b = 0.1 % d = 0.5 % f = 1.0 % h = 50 ppm/k e = 25 ppm/k x = 15 ppm/k y = 10 ppm/k ea ec ed ef eg en ey up to 2 digits blank = standard product description: tnpw1206 1k32 0.5 % t-9 et1 e3 tnpw1206 1k32 0.5 % t-9 et1 e3 model resistance value tolerance tcr packaging (1) lead (pb)-free tnpw0402 tnpw0603 tnpw0805 tnpw1206 tnpw1210 tnpw2010 tnpw2512 examples: 54r1 = 54.1 1k32 = 1320 0.1 % 0.5 % 1.0 % t- 2 = 50 ppm/k t- 9 = 25 ppm/k t- 1 0 = 15 ppm/k t- 1 3 = 10 ppm/k et1 et6 et7 e02 e67 e52 e75 e3 = pure tin termination finish tw120 p n 61k32deea
www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 28758 4 revision: 30-sep-08 tnpw e3 vishay high stability thin film flat chip resistor 0.05 % (1000 h rated power at 70 c) note (1) e52/en only for precision resistors with tolerance 0.1 % and temperature coefficient 25 ppm/k description production is strictly controlled and follows an extensive set of instructions established for reproducibility. a homogeneous film of metal alloy is deposited on a high grade ai 2 o 3 ceramic substrate and conditioned to achieve the desired temperature coefficient. specially designed inner contacts are deposited on both sides. a special laser is used to achieve the target value by smoothly fine trimming the resistive layer without damaging the ceramics. a further conditioning is applied in order to stabilize the trimming result. the resistor elements are covered by a protective coating designed for electrical, mechanical and climatic protection. the terminations receive a final pure tin on nickel plating. the result of the determined production is verified by an extensive testing procedure on 100 % of the individual chip resistors. this includes pulse load screening for the elimination of products with a potential risk of early life failures according to en 140401- 801, 2.1.2.2. only accepted products are laid directly into the tape in accordance with en 60286-3 . assembly the resistors are suitable for processing on automatic smd assembly systems. they are suit able for automatic soldering using wave, reflow or vapour phase as shown in iec 61760-1 . excellent solderability is proven, even after extended storage in excess of 10 years. the encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. the suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the w hole system. the resistors are rohs compliant, the puretin plating provides compatibility with lead (pb)-free and lead-containing soldering processes. the immunity of the plating against tin whisker growth has been proven under extensive testing. all products comply with the gadsl (2) and the cefic-eeca-eicta (3) list of legal restrictions on hazardous substances. this includes full compliance with the following directives: ? 2000/53/ec end of vehicle life directive (elv) and annex ii (elv ii) ? 2002/95/ec restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) solderability is specified for 2 years after production or re-qualification. the permitted storage time is 20 years. notes (2) global automotive declarable su bstance list, see www.gadsl.org (3) cefic (european chemical industry council), eeca (european electronic component manuf acturers association), eicta (european tra de organisation representing the informati on and communications technology and consum er electronics), see www.eicta.org issue environment policy chemicals chemicals for electronics packaging model tape width [mm] pitch [mm] reel diameter [mm/inch] pieces per reel packaging code for product description packaging code for part number type of carrier tape tnpw0402 8 2 180/7 10 000 et7 ed paper tnpw0603 tnpw0805 tnpw1206 tnpw1210 8 4 180/7 1000 e52 (1) en (1) paper tnpw0603 tnpw0805 tnpw1206 tnpw1210 8 4 180/7 5000 et1 ea paper tnpw0603 tnpw0805 tnpw1206 tnpw1210 8 4 330/13 20 000 et6 ec paper tnpw2010 12 4 180/7 1000 e75 ey blister 4000 e02 ef blister tnpw2512 12 4 180/7 1000 e75 ey blister 2000 e67 eg blister
document number: 28758 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 30-sep-08 5 tnpw e3 high stability thin film flat chip resistor 0.05 % (1000 h rat ed power at 70 c) vishay functional performance * typical figures. hf-charac teristic also depends on te rmination and circuit design. 120 110 100 90 8 0 70 60 10 100 1k 10k 100k non-linearity non-linearity a 3 in db resistance value in tnpw0603 tnpw1206 tnpw0402 tnpw0 8 05 3 2 1 100 1k 10k 100k 1m current noise current noise in v/v resistance value in tnpw0402 tnpw0 8 05 0.5 0.3 0.1 0.01 0.03 0.05 tnpw0603 tnpw1206 60 40 20 0 - 40 - 60 - 8 0 1 5 10 50 100 frequency f in mhz hf performance* phase an g le in ? tnpw0603 10 100 1 k 4.75 k 10 k 500 1000 60 40 20 0 - 20 - 40 - 60 - 8 0 tnpw0603 hf performance* 1510 50 100 500 1000 frequency f in mhz [z]-ro in % ro 10 100 1 k 4.75 k 10 k 60 40 20 0 - 20 - 40 - 60 - 8 0 phase an g le in ? 1 5 10 50 100 frequency f in mhz hf performance* tnpw0 8 05 10 100 1 k 10 k 500 1000 60 40 20 0 - 20 - 40 - 60 - 8 0 [z]-ro in % ro hf performance* 1510 50 100 500 1000 frequency f in mhz tnpw0 8 05 10 100 1 k 10 k
www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 28758 6 revision: 30-sep-08 tnpw e3 vishay high stability thin film flat chip resistor 0.05 % (1000 h rated power at 70 c) 90 8 0 70 60 50 40 30 20 10 0 temperature rise 0 0.1 0.2 0.3 0.4 0.5 power in w temperature rise in k 0.6 0.7 0402 0603 0 8 05 1206 1210 2010 2512 deratin g 120 100 8 0 60 40 20 0 - 55 - 25 0 25 50 75 100 125 150 175 ambient temperature in c rated power in % 70 en 3k 1k 100 10 10r 100r 1k 10k 100k test volta g e in v tnpw0 8 05 tnpw0603 sin g le-pulse hi g h volta g e overload test 1.2/50 s en140000 4.27 resistance value in 3k 1k 100 10 10r 100r 1k 10k 100k sin g le-pulse hi g h volta g e overload test 10/700 s en140000 4.27 resistance value in test volta g e in v tnpw0 8 05 tnpw0603 100 w 10 w 1 w 0.1 w 10 s pulse duration t i permissible pulse power p i, max. 100 s 1 ms 10 ms 100 ms 1 s 10 s maximum pulse load p i, max. for sin g le pulses tnpw1206 tnpw0 8 05 tnpw0603 conditions: p 0, n 1000 and u i u i, max. 100 w 10 w 1 w 0.1 w 10 s permissible pulse power p i, max. 100 s 1 ms 10 ms 100 ms 1 s 10 s pulse duration t i tnpw1206 tnpw0 8 05 tnpw0603 conditions: p max. p max. (incl u ding derating) and u i u i, max. maximum pulse load p i, max. for continuous pulses
document number: 28758 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 30-sep-08 7 tnpw e3 high stability thin film flat chip resistor 0.05 % (1000 h rat ed power at 70 c) vishay test and requirements all tests are carried out in accordance with the following specifications: en 60115-1, generic specification (includes tests) en 140400, sectional specification (includes schedule for qualification approval) en 140401-801, detail specific ation (includes schedule for conformance inspection) the following table contains on ly the most important tests. for the full test schedule refer to the documents listed above. the testing also covers most of the requirements specified by eia/is-703 and jis-c-5202. the tests are carried out in accordance with iec 60068 and under standard atmospheric conditions in accordance wi th iec 60068-1, 5.3. climatic category lct/uct/56 (rat ed temperature range: lower category temperature, upper category temperature; damp heat, long term, 56 days) is vali d. unless otherwise specified the following values apply: temperature: 15 c to 35 c relative humidity: 45 % to 75 % air pressure: 86 kpa to 106 kpa (860 mbar to 1060 mbar). the components are mounted for testing on boards in accordance with en 60115- 1, 4.31 unless otherwise specified. the parameters stated in the test procedures and requirements table are based on the required tests and permitted limits of en 140401-801. however, some additional tests and a number of improvements against those minimum requirements have been included. 10 000 v 1000 v 100 v 10 v 10 s pulse duration t i permissible pulse volta g e u i, max. 100 s 1 ms 10 ms 100 ms 1 s 10 s tnpw1206 tnpw0 8 05 tnpw0603 conditions: p i p i, max. maximum pulse volta g e u i, max. test procedures and requirements en 60115-1 clause iec 60068-2 test method test procedure requirements permissible change stability for product types: tnpw0402 tnpw0603 tnpw0805 tnpw1206 tnpw1210 tnpw2010 tnpw2512 4.5 - resistance 1 %; 0.5 %; 0.1 % 4.8.4.2 - temperature coefficient at 20/- 55/20 c and 20/125/20 c 50 ppm/k; 25 ppm/k; 15 ppm/k; 10 ppm/k 4.25.1 - endurance at 70 c u = or u = u max. ; whichever is the less severe; 1.5 h on; 0.5 h off; 70 c; 1000 h (0.05 % r +0.01 ) 70 c; 8000 h (0.1 % r +0.02 ) p 70 x r
www.vishay.com for technical questions, contac t: filmresistors.thinfilmchip@vishay.com document number: 28758 8 revision: 30-sep-08 tnpw e3 vishay high stability thin film flat chip resistor 0.05 % (1000 h rated power at 70 c) 4.25.3 - endurance at upper category temperature 125 c; 1000 h 155 c; 1000 h (0.05 % r + 0.01 ) (0.1 % r + 0.02 ) 4.24 78 (cab) damp heat, steady state (40 2) c; 56 days; (93 3) % rh (0.1 % r + 0.01 ) 4.23 climatic sequence: (0.1 % r + 0.02 ) 4.23.2 2 (ba) dry heat uct; 16 h 4.23.3 30 (db) damp 55 c; 24 h; > 90 % rh; 1 cycle 4.23.4 1 (aa) cold lct; 2 h 4.23.5 13 (m) low air 8.5 kpa; 2 h; 25 10 c 4.23.6 30 (db) damp heat, cyclic 55 c; 5 days; > 95 to 100 % rh; 5 cycles 4.23.7 - d.c. load u = u max. ; 1 min lct = - 55 c uct = 125 c - 1 (aa) cold - 55 c; 2 h (0.05 % r + 0.01 ) 4.19 14 (na) rapid change of temperature 30 min at lct and 30 min at uct; lct = - 55 c; uct = 125 c; 1000 cycles (0.1 % r + 0.01 ) 4.13 - short time overload u = 2.5 x or u =2 x u max. ; whichever is the less severe; 5 s (0.05 % r + 0.01 ) 4.27 - single pulse high voltage overload severity no. 4: u = 10 x or u =2 x u max. ; whichever is the less severe; 10 pulses 10 s/700 s (0.5 % r + 0.05 ) no visible damage 4.37 - periodic electric overload u = or u =2 x u max. ; whichever is the less severe; 0.1 s on; 2.5 s off; 1000 cycles (0.5 % r + 0.05 ) no visible damage 4.22 6 (fc) vibration endurance by sweeping; 10 to 2000 hz; no resonance; amplitude 1.5 mm or 200 m/s 2 ; 6 h (0.05 % r + 0.01 ) no visible damage test procedures and requirements en 60115-1 clause iec 60068-2 test method test procedure requirements permissible change stability for product types: tnpw0402 tnpw0603 tnpw0805 tnpw1206 tnpw1210 tnpw2010 tnpw2512 p 70 x r p 70 x r p 70 x r 15 x p 70 x r
document number: 28758 for technical questions, c ontact: filmresistors.thinfilmchip@vishay.com www.vishay.com revision: 30-sep-08 9 tnpw e3 high stability thin film flat chip resistor 0.05 % (1000 h rat ed power at 70 c) vishay 4.17.2 58 (td) solderability solder bath method; snpb40; non-activated flux (215 3) c; (3 0.3) s good tinning ( 95 % covered); no visible damage solder bath method; snag3cu0.5 or snag3.5; non-activated flux (235 3) c; (2 0.2) s 4.18.2 58 (td) resistance to soldering heat solder bath method; (260 5) c; (10 1) s (0.02 % r +0.01 ) 4.29 45 (xa) component solvent resistance isopropyl alcohol + 50 c; method 2 no visible damage 4.32 21 (ue 3 ) shear (adhesion) rr 1005m and rr 1608m; 9 n no visible damage rr 2012m and rr 3216m: 45 n 4.33 21 (ue 1 ) substrate bending depth 2 mm, 3 times (0.05 % r +0.01 ) no visible damage, no open circuit in bent position 4.7 - voltage proof u rms = u ins ; 60 5 s no flashover or breakdown 4.35 - flammability iec 60695-11-5, needle flame test; 10 s no burning after 30 s - - damp heat (85 5) c; 56 days (85 5) % rh (0.25 r + 0.05 ) test procedures and requirements en 60115-1 clause iec 60068-2 test method test procedure requirements permissible change stability for product types: tnpw0402 tnpw0603 tnpw0805 tnpw1206 tnpw1210 tnpw2010 tnpw2512 applicable specifications ? cecc40000/40400 ? en140400 ? en 140401-801 ? en 60115-1 ? iec 60286-3
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
